C3A, C6A, C6A HDVideoColposcope User Manual Introduction
- 12 -
The first level will be activated first. The second and third levels make compensation on the basis
of the first level and therefore better facilitate visualization of vessels. Press the WHITE key to
exit green filter.
(9) "+" key
Function:
Increase the magnification and zoom in the image.
Operation:
Press this key to zoom in the image. If display of magnification information is
disabled, the magnification is shown on the screen after you press this key and will disappear 3
seconds later. If display of magnification information is enabled, the magnification is always
shown on the screen.
(10) "-" key
Function:
Decrease the magnification and zoom out the image.
Operation:
Press this key to zoom out the image. If display of magnification information is
disabled, the magnification is shown on the screen after you press this key and will disappear 3
seconds later. If display of magnification information is enabled, the magnification is always
shown on the screen.
(11) Camera handle trigger
Function:
Control coordinate display, capture images or display six images.
Operation:
If this trigger is set to control coordinate display, pull this trigger, the screen displays
a coordinate; pull this trigger again, the coordinate disappears. If this trigger is set to capture
images, pull this trigger, the current image is captured. If this trigger is set to
Display Six Images
,
pull this trigger on
Examine
interface, and there will be a comparison of 6 images identified by
the software. The 6 identified images are for reference only. By default, this trigger is set to
Capture Image
. For setting of this trigger, see section
5.12.2.4Setting the Camera Handle
Trigger.
2.3
Vertical Stand
Based on the shape of chassis, the vertical stand has different appearances, as shown in Figure
2-4 and Figure 2-5.
