Page 16 of 40
Function F03 Ring-back Trigger Cancellation
When an input is active, the dialler will attempt to make calls. If the input (see F53) allows a
wait
time between calls
and the dialler will
answer incoming calls
(also see F04, F05, and F06).
The caller may then cancel the input (as below).
03
0
= Caller cannot cancel Inputs.
The EDAC 400-02 will play its voice
messages and not stop making calls.
1
= Input cancelled by any number key.
Pressing
*
and
#
does
not
cancel the
Input.
2
= Input cancelled by PIN.
Default: 1 (Cancel by any number key)
Function F04 Answer Incoming Calls When any Input Active
When an input is active the EDAC 400-02 will attempt to make alarm notification calls. Setting a
wait time (function
F53
) gives you the opportunity to call into the EDAC 400-02 and cancel the
input. When an input is cancelled, the alarm condition still exists but the EDAC 400-02 will stop
making alarm notification calls.
The EDAC 400-02 will only use this function and its setting when any input is active.
04
Answer all calls after …
2
to
9
= 2 to 9 rings,
#
= 12 rings when any Input is active.
(Displays an ’
E
’.
NB: This is not
an error).
0
= Never answer any incoming calls
when any Input is active.
Default: 4 (Answer after four rings when any Input active)
