5
en
RUCKUS
• Never install damaged batteries.
• Never install batteries of mixed types
or of different ages in the transmitter.
• Always remove exhausted batteries.
• Always remove batteries before storing the transmitter.
• Low battery power can result in loss of control of the RC vehicle.
transMItter Battery safety PrecautIons
reMoVIng the VehIcle Body
a
B
InstallIng the Battery In the VehIcle
1. Turn the battery clips (
a
) clockwise
to remove the battery strap (
B
).
2. Install a fully charged battery.
3. Install the battery strap.
4. Turn the battery clips counterclockwise
to secure the battery strap.
If desired, you can put foam blocks (ECX2015)
in front of the battery so the weight of the
battery increases rear traction or in back
of the battery to increase steering response.
InstallIng transMItter BatterIes
Install 4 AA alkaline batteries into the transmitter,
following the instructions provided for your radio system.
We recommend using only alkaline AA batteries in the transmitter;
however, it is possible to use rechargeable Ni-MH batteries.
CAUTION:
If using rechargeable batteries, charge
only rechargeable batteries. Charging non-rechargeable
batteries may cause the batteries to burst, resulting in
injury to persons and/or damage to property.
NEVER install damaged batteries, batteries of mixed types or batteries
of different ages in the transmitter. Remove exhausted batteries.
NEVER store the transmitter with batteries installed.
