ECX Ruckus ECX03242, Инструкция по эксплуатации

Страница: 4 / 19

4
SCT
MT
EN
BOX CONTENTS
VEHICLE PREPARATIONS
1b 1a
2
3
• Never install damaged batteries.
• Never install batteries of mixed types or of different ages
in the transmitter.
• Always remove exhausted batteries.
• Always remove batteries before storing the transmitter.
• Low battery power can result in loss of control of the
RC vehicle.
TRANSMITTER BATTERY SAFETY PRECAUTIONS
INSTALLING TRANSMITTER BATTERIES
1. Slide the panel open on the bottom of the transmitter.
2. Obey the battery plus (+) and minus (-) diagram in
the transmitter to install 4 AA batteries.
3. Slide the panel closed.
We recommend using only alkaline AA batteries
in the transmitter.
CAUTION: If using rechargeable batteries, charge
only rechargeable batteries. Charging non-rechargeable
batteries may cause the batteries to burst, resulting in injury
to persons and/or damage to property.
CHARGING THE VEHICLE BATTERY
Refer to your battery and charger manual for proper charging
instructions.
1a. ECX ® Torment ™ 1/10-scale 4WD Short Course Truck, (ECX03242) or 1b. ECX ® Ruckus ® 1/10-scale 4WD Monster Truck (ECX03243)
2. Spektrum
™
STX2
®
Transmitter (SPMSTX200)
3. AA (4) Batteries
Electrical Components
DYNS1213 Motor Included
SPMS605 Waterproof Steering Servo Included
SPMSRX200 Waterproof Receiver Included
DYNS2210 Waterproof Electronic Speed Control (ESC) Included
Vehicle battery Needed to complete
Battery charger Needed to complete