28
ECTIVE SC 20 Silent
tools, stand on dry ground and keep your hands dry .
•
Prevent water from entering the inside of the controller .
When installing the controller outdoor, protect it from direct
sunlight and from rain .
•
After installation, make sure that all connections are tight
and that no heat accumulation takes place .
Mounting the Controller
•
Mount the controller upright on a non-flammable surface .
•
Maintain a minimum clearance of 15cm below and around
the device to ensure sufficient air circulation .
•
Install the controller as close as possible to the connected
batteries .
•
To mount the controller, mark the positions of the fastening
holes, drill the four holes to fix the device to the wall with
the cable ports facing downwards .
•
Keep the solar charge controller protected from direct
sunshine and other sources of heat .
•
Protect the solar controller from dirt and moisture .
•
Ensure enough free space around the controller for
sufficient ventilation .
