Serial ATA RAID Quick User’s Guide
30
NOTE:
The RAID1 array supports two hard disks only.
4. When the RAID1 array’s configuration is finished, click the button
“Create”. Then a “Create Mirror RaidSet” dialog will be popup.
<Note>
Source: The first selected disk.
Target: The second selected disk.
Create Only: This operation will destroy all data on all the selected
disks and create a clean mirror array without any data
on it.
Create and Duplicate: Duplicate operation will reserve data on the
source disk and copy them onto the target disk.
Ok: Start the operation.
Cancel: Cancel the operation.
<Disk Copy Remaining Sector>: Show the remaining copying data.
