Serial ATA RAID Quick User’s Guide
23
4) Click the tab “Create Raid”, you can find three drop-down box and three
panes. Those meaning will be showing below.
Viewing the “Create Raid”
a) Raid Type: Click the drop-down box “Raid Type”. This box enables the
user to select array type. There are four array types that the user can
select: JBOD, RAID 0, RAID 1 and RAID 0+1. User can select any one
array type to create a RAID set.
b) Block Size: If user selected RAID 0 and RAID 0+1 array types in the
“Array Type” box, the “Block Size” drop-down box will be enabled and
user must select a block size. Clicking the drop-down box “Block Size”,
there are seven block size that the user can select: 8k, 16k, 32k, 64k,
128k, 256k and 512k. User can select any one block size to create a
RAID 0 or RAID 0+1 set. The default selection is 64k.
