Serial ATA RAID Quick User’s Guide
29
6. Next, you can click “Cancel” button to leave or click “Ok” button to
continue after the operation being selected. The differential warning
messages will be popup following the differential operations. The
warning messages are similar to JBOD array creation but the
operation is “Split data into Raid0”.
7. If the operation is “Split data into Raid0”, a warning message will be
popup, seeing below:
Next, you can click “Yes” button to start the operation or click “No”
button to cancel.
8. When the operation is finished, the restart warning message will be
popup as well as JBOD array creation except for the operation “Split
boot OS into Raid0”.
Next, you can click “Ok” button to restart the windows and start the
operation “Split boot OS into Raid0”. Or click “Cancel” button to
suspend this operation. But, this operation is still done after restarting
the windows next time.
c) To create a RAID 1 (Mirror) array, follow these steps:
1. “Configuration”
→
“Create Raid”
→
“Raid Type”
→
RAID 1.
2. From the drop-down box “Mode Type”, select the mode type you want.
3. From the “Available Disks” pane, select the disk and click downward
arrow icon or double click it to add the disk on the “Selected Disks”
pane.
