manualshive.com logo in svg

ECS P6LX2-A, Руководство пользователя, Страница: 71 / 84

Поделиться
Скачать
ECS P6LX2-A Скачать руководство пользователя страница 71

P6LX2-A User’s Manual

4:

 Reference Information – 4.29

VGA Active Monitor

When this line is set to the default, Enabled, the system will

not initiate power saving while there is display activity. The other
option is Disabled.

Soft-Off By PWR-BTTN

This line controls the function of a power switch attached to

the J9 Power Push Button connector. When set to the default,
you must press the power switch for four seconds or more to
turn the system off. Pressing it for less than four seconds will put
the system into Suspend mode. If your system has a separate
Suspend switch you can set this to Instant Off and the power
switch will only function to turn the system on and off.

Delay 4 Sec.

Default

Instant Off

CPUFAN Off In Suspend

When set to the default setting, Enabled, the CPU cooling fan,

or both fans if two CPUs are installed, will turn off when the
system enters Suspend mode.

Resume By Alarm

You can set the system to wake up at a certain date and time

by setting this line to Enabled. When enabled, two more lines
appear to allow you to set the wake-up date and time. The date
is a day within the current calendar month. The screen on the
next page illustrates this. The default setting is Disabled.

Содержание P6LX2-A





















































































Отзывы:

Нет отзывов