manualshive.com logo in svg

ECS P6LX2-A, Руководство пользователя, Страница: 66 / 84

Поделиться
Скачать
ECS P6LX2-A Скачать руководство пользователя страница 66

P6LX2-A User’s Manual

4:

 Reference Information – 4.24

Memory Hole At 15M–16M

Some special add-on cards require a 1MB address space be-

tween 15 and 16MB. The documentation for this type of card
should tell you if it needs this. The default setting is Disabled.

AGP Aperture Size

This item sets the maximum amount of system memory an

AGP display card will use to store 3D texture mapping data. The
larger the aperture, the better the performance of this 3D func-
tion. The settings range from 4MB to 256MB. The default setting
is 64MB.

Special Features

If you set the two items in this section to Enabled, the external

bus clock will change to 68.5MHz, resulting in the speed of the
CPU being slightly overclocked. This provides some system per-
formance enhancement. This feature is not recommended for use
with this mainboard. The default settings are Disabled.

To return to the main menu press the Esc key.

Содержание P6LX2-A





















































































Отзывы:

Нет отзывов