manualshive.com logo in svg

ECS P6LX2-A, Руководство пользователя, Страница: 50 / 84

Поделиться
Скачать
ECS P6LX2-A Скачать руководство пользователя страница 50

P6LX2-A User’s Manual

4:

 Reference Information – 4.8

The AGP Slot

The AGP (Accelerated Graphics Port) slot is for an AGP dis-

play card. With the Optimum Settings loaded in the BIOS Setup
Utility the AGP has a default memory aperture of 4MB, expand-
able to 256MB.

The RAIDport™ Slot

The RAID

port

™ slot extension to the PCI4 slot forms an ex-

tended slot that supports an Adaptec ARO-1130 or compatible
RAID card With the software supplied on the Support Disk this
mainboard will support the following RAID levels:

• RAID Level 0
• RAID Level 0/1
• RAID Level 5
For more information on this feature please see the documen-

tation that accompanies the SCSI support software on the Sup-
port Disk.

Supported CPUs

This mainboard supports the Intel Pentium II CPU running at

the following speeds with a 66MHz external bus clock:

• 233MHz
• 266MHz
• 300MHz
• 333MHz

CPU Retention Modules

This mainboard ships with a CPU retention module which

attaches to the mainboard to provide guide rails and latch recep-
tacles to hold the installed CPU in place. Please see Section 2,
The CPU Retention Module, if you need more information on
how to install and use the module.

Содержание P6LX2-A





















































































Отзывы:

Нет отзывов