manualshive.com logo in svg

ECS P4VXASD, Руководство пользователя, Страница: 59 / 66

Поделиться
Скачать
ECS P4VXASD Скачать руководство пользователя страница 59

 

53 

 

5.  Follow the instructions on the screen to install the 

items. 

Drivers and software are automatically installed in sequence. 
Follow the onscreen instructions, confirm commands, and al-
low the computer to restart after each installation.  

Browse CD  

The Browse CD button is the standard Windows command 
that allows you to open Windows Explorer and show the con-
tents of the support CD. 

Before installing the software from Windows Explorer, look for 
a file named README.TXT, PATH.DOC or something similar. 
This file may contain important information to help you install 
the software correctly. 

Some software is filed in separate folders for different operat-
ing systems, such as DOS, WIN NT, or WIN98/95. Always go 
to the correct folder for the kind of OS you are using. 

To install the software, execute a file named SETUP.EXE or 
INSTALL.EXE by double-clicking the file and then following 
the instructions on the screen. 

Exit  

The Exit button closes the Auto Setup window.  

 

 

Содержание P4VXASD



































































Отзывы:

Нет отзывов