42
Power Management Setup Page
This page sets some of the parameters for system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S
Yes
Power Management/APM
Enabled
Video Power Down Mode
Suspend
Hard Disk Power Down Mode
Standby
Standby Time Out(Minute)
Disabled
Suspend Time Out(Minute)
Disabled
Resume Up on Ring
Disabled
Resume Up on LAN
Disabled
Resume Up on PME#
Disabled
Resume on KBC
Disabled
Wake up key
Any key
Wake up password N/A
Resume on RTC Alarm
Disabled
RTC Alarm Date
15
RTC Alarm Hour
12
RTC Alarm Minute
30
RTC Alarm Second
30
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power
management Interface). Use this item to enable or disable the
ACPI feature.
Power Management
Use this item to enable or disable a power management
scheme. If you enable power management, you can use the
items below to set the power management operation. Both
APM and ACPI are supported.
Video Power Down Mode
Use this item to determine which power-saving mode is re-
quired to power down the graphics sub-system. You can force
the graphics to power down in Stand By or Suspend modes,
or you can disable the power down.
Hard Disk Power Down Mode
Use this item to determine which power-saving mode is re-
quired to power down the hard disk drive(s). You can force the
hard disk to power down in Stand By or Suspend modes, or
you can disable the powerdown.