41
(column address strobe). It is recommended that you leave
this item at the default value. The 2T setting requires faster
memory that specifically supports this mode.
SDRAM Bank Interleave
Enable this item to increase SDRAM memory speed. When
enabled, separate memory banks are set for odd and even
addresses and the next byte of memory can be accessed
while the current byte is being refreshed.
AGP Comp. Driving
Use this item to signal driving current on AGP cards to auto or
manual. Some AGP cards need stronger than normal driving
current in order to operate. We recommend that you set this
item to the default.
Manual AGP Comp. Driving
When AGP Driving is set to Manual, use this item to set the
AGP current driving value.
AGP Mode
This item provides the OnBoard VGA mode with three op-
tions of 1,2, 4 multiplied frequency.
AGP Aperture Size
This item defines an AGP for the graphics. Leave this item at
the default value 64MB.
Auto Detect DIMM/PCI Clock
When this item is enabled, BIOS will disable the clock signal
of free DIMM/PCI slots.
CLK Spread Spectrum
Use this item to set the system bus spread spectrum for the
installed processor.