EN
47
DO NOT MOUNT THE FAN ON A SUSPENDED CEILING,
MINERAL WOOL BOARDS OR PLASTERBOARD, ETC.
Choose a location for the fan where the blades are at a
minimum distance of 2.35m from any objects. Mount the
support plate on the ceiling, or the plate already in use. In
order to fasten the plate correctly, use two self-threading
screws, to fix the plate to the beam or joist. If the place you
have chosen does not have a suitable beam for fastening,
install a 5 x 10 cm base between the ceiling joists to support
the fan.
1.- Attach the plate with the two screws included with the fan.
2.- Hang the fan on the hook on the decorative cover,
through a hole in the light fixture.
3.- Make electrical connections.
(See connection instructions)
4.- Secure the light fixture in the middle to the decorative
cover with the four screws provided. Turn the light fixture in an
anti-clockwise direction if necessary, to ensure that it is
securely installed.
5.- Attach each blade to its holder using three screws per
blade.
Then attach the holders to the fan using two screws per
holder.
6.- Attach the anchoring elements.
The operating sequence when pulling the chain is:
OFF(0)-MAXIMUM(3)-MEDIUM(2)-MINIMUM(1)
• Fan switch
(winter / summer mode): the fan rotates to the right in
one position and to the left in the other. This means that the
blades take in the air from above and push it downwards or
act as an extractor (taking in air from below to push it
upwards).
• Although your fan has been installed more than 2.35
metres above the ground, be careful when lifting objects near
to the blades.
• Light switch The operating sequence when pulling the chain
is:
OFF-ON
INSTRUCTIONS FOR USE
Содержание GFC27-525W-1L
