ECR International Ductless Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 40

9 PN 20009722 REV E, [02/11/2015]
UNIT MOUNTING
NOTICE
Do not throw template away with packaging. See
Figure 8 Page 10.
Do not use drain or water connections for lifting.
Unpacking
Cassette fascia and main chassis are packaged together.
1. Remove banding straps and lift cardboard lid.
2. Fascia is packed in bubble wrap on top of chassis.
Fascia is not attached to chassis for shipping.
3.
Cardboard template is between chassis and fascia.
See Figure 8 Page 10.
4.
Lift fascia and template from box and set aside.
5. Remove cassette chassis from box utilizing four corner
brackets for lifting.
6. To protect fascia from dirt and damage return them to
box until ready to install.
7.
Do not throw away two polystyrene blanking-off pieces
with packaging. See Figure 6.
Blanking Off
Fascia discharge slot(s) need blanking off when ducts are
used to channel conditioned air to other areas.
• Position two polystyrene blanking off strips (provided) in
fascia discharge slots to direct air to ducts.
• Up to two non-adjacent sides may be blanked off.
If fascia discharge slot needs blanking off — Figure 6
1. Remove inlet grilles and filters. See Figure 4 and
Figure 5.
2. Turn fascia over to expose polystyrene insulation.
3.
Push one polystyrene blanking-off pieces into recess in
polystyrene fascia insulation.
Figure 4 - Models 08–12 , One Grille & One Filter
Figure 5 - Model 18 - 20, Two Hinged Grilles
And Two Filters
Figure 6 - Applying Blanking-Off Pieces