Important: Maintaining Waterproofness
If the caps or the door on either side panel are not properly closed, the
unit is
NOT
watertight.
Waterproof Caps
To close properly, turn the cap clockwise
so the cap’s arrow point lines up with
the locked symbol
.
To access the connections, turn the cap
counterclockwise so the cap’s arrow point
lines up with the unlocked symbol
,
then pull tab on cap to open.
Waterproof Door
To open, squeeze the spring loaded
latch to release the locking tabs, then
pull open the door using the handle.
Door cannot be opened unless the
spring loaded latch is squeezed while
pulling the door open. The waterproof
seal on the door will create some
resistance while opening the door.
To close, push the door firmly until it 'clicks' into place and the locking
tabs are secured into position. If needed, press on the door firmly near the
locking tabs to ensure the door is fully closed and locked. The waterproof
seal on the door will create some resistance while closing the door.
To ensure the compartment is watertight:
·
Visually check the seal on the door to ensure it is free from dirt and
other contaminants, and also check for any damage to the seal. If the
seal is damaged or dirty the compartment may not be waterproof.
·
Ensure the door is fully seated into its closed and locked position. If the
door is not properly closed the compartment may not be waterproof.
·
Ensure no obstruction is keeping the door from closing properly. If the
door is not properly closed the compartment may not be waterproof.
In/Out Connections Continued...
RIGHT SIDE
USB Jack
Device Holding
AUX 2 Jack
DOOR AJAR
OPEN
POWER OUT + CONNECT
WATERPROOF
COMPARTMENT
M
IC
•
U
SB
O
UT
• A
UX-I
N
