Maintenance
4.2 Cleaning the Robot and Charging Dock
4.3 Main Brush, Side Brushes and Driving Wheels
Turn the bottom power switch to the OFF position.
Clean the Robot
Clean Charging Dock
Unplug the Charging Dock.
It is suggested to clean Main Brush after every 4 - 5 cleaning cycles.
Use a cleaning cloth dampened with water or neutral detergent, wipe and dry the product. Do not let water
penetrate inside the product.
Cleaning the Main Brush
Push the buttons on
both sides of the suction
inlet at the same time.
Remove the Main Brush
Suction Option component.
Take out the Main Brush. Remove
hair and debris that may be
tangled around the Main Brush
with the Multi-Function Cleaning
Tool. Each row of bristles on the
Main Brush can also be removed
and cleaned separately.
Wipe the robot’s suction
intake with a dry cloth.
After cleaning, reinstall Main
Brush and Main Brush Suction
Option component.
Remove each Side Brush
by pressing the center
segment, then pulling the
brush out. Wipe the Side
Brush with a dry cloth.
Cleaning and Replacing the Side Brushes
To replace, insert each Side
Brush into the slot with the
matching color. Press until you
hear a click.
Tips:
1. The Side Brushes incur a lot of wear. We suggest you inspect them after each use and change if necessary.
2. When installing a Side Brush, make sure its color matches the slot color or the brush will not work normally.
Cleaning the Driving Wheels
Use the Multi-Function Cleaning Tool to remove any dust or hair tangled in the Driving
Wheels.
15
1
3
4
2
EN
