EN
11
3. Operating and Programming
AUTO Cleaning Mode
Edge Cleaning Mode
Spot Cleaning Mode
Return to Charger Mode
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DEEBOT 4 focuses on a specific area
to clean.
When battery power gets low, DEEBOT 4
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT 4 cleans in
a straight line and changes direction when it
meets an obstacle.
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DEEBOT 4 cleans along a border (e.g. wall).
* Pause DEEBOT 4 before switching Cleaning Modes.
1
3
2
4
3.3 Cleaning Mode Selection
DEEBOT 4 has several Cleaning Modes to choose from to effectively clean different floors.
Cleaning Modes are selected using the Remote Control.
DEEBOT 4 can be also be sent back
to the Charging Dock at any time by
pressing the Return to Charger Mode
Button on the Remote Control.
*
