Ecosoft E-360, Техническое описание и руководство по эксплуатации

Страница: 3 / 16

3
TECHNICAL DATA SHEET AND OPERATION MANUAL
ECOSOFT UV ULTRAVIOLET DISINFECTION UNITS HR-60, Е-360, Е-480, Е-720, ET-24, EB-45
4. WATER QUALITY LIMITATIONS
Turbidity 0.58 mg/l
Iron 0.3 mg/l
Manganese 0.05 mg/l
Hydrogen sulfide 0.05 mg/l
Total water hardness 120 mg/l CaCO
3
5. INSTALLATION INSTRUCTIONS
1. Before starting operation of the UV disinfection Unit (hereinafter referred to as the Unit), all its
components should be disinfected.
2. The Unit must be connected to the ground loop.
3. Do not use the disinfection Unit in open areas where it may be exposed to atmospheric conditions.
4. Install the Unit in the production line as close as possible to the water consumption point.
5. Install the Unit in the production line in such a way as to exclude the possibility of water entering the
electrical equipment (e.g., when replacing UV lamp).
6. The Unit can be installed vertically or horizontally in the production line. The drain outlet must face
downwards (to outflow), if the unit is positioned vertically. When the Unit is positioned horizontally:
the input/output of the Unit must be directed upwards.
7. During installation, provide free space for UV lamp removal/installation.
8. Take out (insert) the UV lamp gently, handle only by the ends, and in no case by the glass, try not to
damage the lamp itself, as well as the quartz sleeve into which it enters.