Ecosoft E-360, Техническое описание и руководство по эксплуатации

Страница: 6 / 16

6
TECHNICAL DATA SHEET AND OPERATION MANUAL
ECOSOFT UV ULTRAVIOLET DISINFECTION UNITS HR-60, Е-360, Е-480, Е-720, ET-24, EB-45
8. STANDARD PIPING ARRANGEMENT
WATER
SUPPLY
OUT
VALVE
ELBOW
VALVE VALVE
COUPLING
COUPLING
ELBOW
Fig. 3. Ecosoft UV Unit standard piping layout
9. OPERATING INSTRUCTIONS
1. The ultraviolet disinfection unit will work automatically after powering up. It is not recommended to
disconnect the Unit from the mains except in cases of prolonged interruptions in operation, for lamp
replacement or other technological procedures.
2. For Unit proper operation, we recommend:
• Monitor functionality of the UV lamp regularly.
For this, the Unit is equipped with an indicator on the side panel
and an audible alarm system (for Ecosoft UV E, ET, EB series).
The listed devices can operate in the following modes:
Alarm signals
Description
Indicator light Sound alarm UV lamp
green OFF on System regular operation
flashing red intermittent sound on System improper function
flashing red intermittent sound off System improper function
• Replace the UV lamp and flush the quartz sleeve as necessary, but at least once a year. To flush
the sleeve, remove it from the stainless steel housing. To do this, disconnect the Unit from the
mains, shut off the water supply. Drain the remaining water through the drain outlet. Remove the
quartz sleeve with the lamp from the housing, unscrew the bottom end cap and pull carefully the
lamp out of the quartz sleeve. Flush the surface of the quartz sleeve with food grade detergents
(non-abrasive, to avoid scratches), and reassemble the Unit in the reverse order.