www.ecosmartfire.com
e-NRG Bioethanol is the only fuel to use in this appliance.
engLiSh
How to Operate the Burner
Turning your Burner OFF
- Extinguishing the Flame
To view a video of extinguishing your Fire, visit our website at
ecosmartfire.com and click on Fire Safety.
1. Let it burn until the fuel is consumed. The flame will extinguish
when no fuel is left.
2. use the lighting rod to move the circular ring to the fully off
position.
WARNING: Fire hazard. With either method, let burner cool for
at least 60 minutes before refueling.
XL Series:
The XL Series have a flip lid shut-off mechanism.
The lid flips across the ignition zone which extinguishes the flame.
AB Series and VB Series:
A lid is used to extinguish the flame.
Re-igniting the Burner
WARNING!
• NEVER LEAVE A FIRE UNGUARdEd.
• ONLY USE
e-NRG BIOETHANOL IN THE BURNER.
• IGNITION OF THE LIGHTING ROd SHOULd ONLY BE
PERFORMED ABOVE AND BESIDE THE BURNER TO AVOID
DRIPPING THE FUEL AT ANY STAGE OF THE LIGHTING
PROCESS OUT OF THE FIREPLACE ONTO THE FLOOR.
• THE BURNER MUST NOT BE FILLEd AT ANY TIME WITH
ADDITIONAL e-NRG BIOETHANOL WHEN THE FLAME IS GOING
OR WHEN THE BURNER IS HOT.
• AN INHERENT dANGER WITH
e-NRG BIOETHANOL IS THAT
THE FLAME PRODUCED CAN BE NEARLY INVISIBLE IN
NORMAL DAYLIGHT CONDITIONS OR WHEN FIRST LIT. BEING
DIFFICULT TO SEE, AN INEXPERIENCED PERSON CAN EASILY
ASSUME THE BURNER IS EMPTY AND NEEDS FILLING.
ASSUME BURNER IS LIT, EVEN IF YOU DON’T SEE FLAME.
FOLLOW PROCEDURE TO EXTINGUISH FLAME AND ALLOW
UNIT TO COOL BEFORE ATTEMPTING TO REFUEL. NEVER
REFUEL WITH BURNER LIT OR WHILE UNIT IS HOT.
1. move the slider/hinge so the Burner opening is fully open.
2. Wait 60 minutes before re-igniting the Burner. the Burner should
be at room temperature. Please be aware that if this time is not
respected the ignition could be pressurised and therefore stronger. A
pressurised ignition can cause serious burns if you are close to the
Burner.
3. re-ignite as described in “Lighting the Burner”.
