8
SETTING AND ADJUSTING CONTROLS WITH THE REMOTE
TURNING YOUR BREEZE ON & OFF
The Breeze
AT
will come on by pressing the POWER button on the remote.
To turn on the Purifier feature, press the Purifier On/Off button once. To turn the
Purifier feature off, press the Purifier On/Off again.
1. REMOTE FAN CONTROL
The remote will set the fan by pressing the FAN UP or FAN DOWN button. To turn
the fan off, press the POWER button (turns unit off as well).
Increased air circulation improves the cleansing properties of the Breeze
AT
,
so the fan control should be set as high possible without creating an undesirable
noise level.
Note: A ceiling fan can also aid in distribution of cleansing properties.
2. PURIFIER CONTROL
The Purifier feature is turned on and off by pressing the PURIFIER ON/OFF button.
The Purification level is adjusted by pressing and holding either the PURIFIER UP
or PURIFIER DOWN button and watching the indicator LEDs (small blue lights) on
the front of the unit until achieving the desired level
Purifier Control: Set the purifier to approximately 40% (2 LEDs lit).
Adjust the purifier control up or down after one hour based on the
following criteria:
1. The chart shows the correct purifier level for the square footage of the
environment. Under normal conditions it is not necessary to adjust the
purifier control above the square footage of the environment.
2. Keeping in mind the previous statement (#1), adjust the purifier so that the
purifier odor fades into the background 15-30 seconds after entering the
environment.
3. When the remote’s purifier control is turned off, the purifier will be turned
completely off, the fan and ionization will continue to operate normally.
3. REMOTE SANITIZING MODE
• Press the SANITIZER button once. You should leave the area until the sanitization
is complete.
• The Breeze
AT
will operate for two hours at the maximum purification output and
then return to the output that matches the purifier setting.
• To interrupt sanitize mode before the end of the two hour period, press the
SANITIZER button, OZONE ON/OFF button, or the POWER button.
