EcoQuest Breeze AT, Руководство пользователя

Страница: 7 / 12

7
ECOTECH PURIFIER PLATE INSTALLATION
The Breeze AT utilizes one Ecotech
purifier plate. Installation is as follows:
1. Unplug the Breeze AT .
2. Remove the rear filter door (see
previous page).
3. Fully insert the purifier plate between
the guides until it stops.
4. Replace the filter door.
WARNING: DO NOT OPERATE the Breeze AT without the
Rear Access / Filter Door installed correctly.
PLACING THE UNIT
Place the unit as high as possible to
insure complete purification. (On top
of a bookshelf, high cabinet, etc.)
Suggested locations, listed in the order
of preference:
1. Nearest the source of the worst
pollution.
2. Near a cold-air return to
thoroughly circulate clean air
throughout the area.
3. In the area most heavily used to
achieve maximum benefit.
Note:
• The rear of the unit should always
have at least one inch of open
area to allow unrestricted airflow.
• Be sure power cord is not
accessible to small children to
prevent injury.