Econ P10A, Инструкция по установке и эксплуатации

Страница: 28 / 37

0h 6h 12h 18h 24h
Operation and Use
24
1) This curve function records the water inlet temperature and water outlet temperature;
2) Temperature data is collected every five minutes and the 12 sets of temperature data are
saved every hour. Timekeeping is made from the latest data saving, if the power is disrupted
when the time is less than 1 hour (12 sets), the data during such period will not be saved.
3) Only curve for power-on status is recorded, and that for power-off will not be saved;
4) The value of the abscissa indicates the time from the point on the curve to the current time
point.The leftmost point on the first page (0 on the abscissa) is the latest temperature record;
5) Temperature curve record is provided with power-down memory function.
1.7 Fault interface
Click the fault icon on the main interface and the interface display is as follows:
Note:
:Fault code
:Fault name
:Occurrence time of the fault, Day and month hour: minute: second
:Click this key to clear all fault records
1.8 Color Display Calibration
Keep click quickly at the blank area on any interface till you hear a long beep. Then you
will enter the calibration interface. Click "+" to start calibration.
When you hear the beep again, you will finish calibration and exit
If the current temperature is Month and day hour: minute: second