Econ P10A, Инструкция по установке и эксплуатации

Страница: 18 / 37

Operation and Use
14
13
11 12
14
Key number Key name Key function
On and off
Mode key
Temperature
setting
Timer setting
Setup key
Click this key to switch ON or OFF
Red represents ON, while grey represents OFF
Click this key to set the target temperature
Click this key to set the timer. White represents not
enabled, while green represents enabled
Key function
Click this key to check the unit status, time,factory
parameter, temperature curve, timer setting and
Mute setting
Hot water mode, heating mode, cooling mode,
hot water+heating mode or hot water+cooling mode
can be selected by pressing this key.
Note:
is fault icon,This Icon will flash when there is an error shown up,then the display will
enter Failure record interface after tapping this icon;
is defrosting icon, the machine is in defrosting mode when this icon is shown;
is electric heater icon,the machine is in electric heater mode when this icon is shown;
is ambient temperature icon,show the current ambient temperature;
is heating mode icon, the machine is in cooling mode when this icon is shown;
is hot water mode icon, the machine is in hot water mode when this icon is shown;
is tank water temperature icon, the machine is in hot water mode when this icon is
shown; otherwise,this icon is not shown;
11 11
12 12
13 13
Lock screen
Click this key to lock the screen. White represents
not enabled, while green represents enabled
is water flow icon showing the current water flow note When H31=0,
the icon is not displayed
14 14