Ecolawn ECO250, Руководство оператора

Страница: 13 / 19

www.ecolawnapplicator.com Turf Pros #1 Top dresser P a g e 11 | 17
Troubleshooting And Adjustments
Important: Be sure the engine is turned off before performing any adjustments or maintenance on the
spreader.
The most frequently encountered problems involve the conveyor, but these can be easily resolved with a
few simple solutions. Check the following symptoms for your particular problem, and make the
corresponding adjustments as needed.
Symptom: The V-belts are slipping. The spreader's hopper is full. The conveyor has been activated
by activating the conveyor lever, but the conveyor belt does not turn because the V-belts are
slipping.
Solution: The V-belts (denoted in red) are not tight enough. First remove the guards from the stretcher and
check the tension of the belts, which may be slipping on the pulleys that power the
conveyor belt. If the tension is incorrect, adjust it by lengthening the stretch rod of the conveyor activation
clutch, a few turns at a time, as follows:
1.Loosen the (yellow) jam nuts to adjust
the tension of the stretcher rod.
2.Turn the (green) stretcher collar counter
clockwise to increase tension, or
clockwise to reduce it.
3.Tighten the (yellow) jam nuts to lock the
tension at the proper level.