Ecolawn ECO250 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 19

Ecolawn ECO250 Скачать руководство пользователя страница 5

www.ecolawnapplicator.com

Turf Pros #1 Top dresser

P a g e

3 | 17

Engine

The Ecolawn Applicator's gear casing is filled with oil (SAE 30) before shipping, but the oil level must be

checked to ensure that it is filled to the proper level before operation. The

engine does not

have oil and

must be filled to proper level before starting. Use lead-free gasoline only. DO NOT USE OIL/GAS

MIXTURE. Please refer to the Engine Manual for additional information.

Ecolawn Applicator® One Year Limited Warranty

Terms: Ecolawn Applicators are guaranteed to be free of defects in materials or workmanship for one year

from the registered purchase date. To qualify, the applicator must be registered online at

www.ecolawnapplicator.com (under the product tab). This one-year warranty is extended only to the

original, registered purchaser of the Ecolawn Applicator.

Starting from the registered purchase date, Ecolawn will replace, free of charge, any part(s) on the machine

(excluding the engine*) that Ecolawn or an approved agent deems to be defective in material and/or

workmanship upon examination.

* Note: The engine is covered by its own guarantee; see engine manual for details.

«
...
3
4
5
6
7
...
»

Содержание ECO250




















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды