Ecolab Lubo-DryExx -Basic, Руководство по эксплуатации

Страница: 35 / 42

417101633_DryExx_Basic - 35 - Rev.: 6-02-15
6.2.4 Operating mode
Fig. 6.24

To alter the operating mode:

Button 1 for automatic “ON“
(pulse/pause dependent on the relevant release

Button 2 for automatic „Off“

Button 4 to activate the OGM watching

Button 9 to activate the direct controlled valves

Leave screen and go back to "Main menu" (see chapter 6.2.3 )

Button "ESC"
After leaving screen “Operating mode” you come back to the "Main menu" (see chapter 6.2.3 ).

Jump to screen "booster menu" (see chapter 6.2.5 )

Button “0”
6.2.5 Booster menu
Fig. 6.25

To start the booster function for the circuit selected

Buttons 1 to 8 (dependent on lubrication circuit selected)

Leave screen and go back to "Main menu" (see chapter 6.2.3 )

Button "ESC"
After leaving screen “Booster menu” you come back to the "Main menu" (see chapter 6.2.3 ).

To leave the screen “main menu” (see chapter 6.2.3 )

Button “ESC”
After leaving the image, the “Basic screen“ will be displayed again (see chapter 6.2.1 ).
6.2.6 Password
Should a password request appear.
6.2.6.1 Password input
NOTE
Flashing parameters must be confirmed using „ENTER“, even if no amendment is carried
out. After the password is entered the screen jumps autoamtically to the previsou screen
selected.
Fig. 6.26
Screen “Enter password“:
• Operator password

To leave the screen

Button "ESC"
6.2.6.2 Incorrect password entry
NOTE
Should you input the wrong password, you will see the following display.
Fig. 6.27

To leave the screen

Button "ESC"