Ecolab Lubo-DryExx -Basic, Руководство по эксплуатации

Страница: 28 / 42

417101633_DryExx_Basic - 28 - Rev.: 6-02-15
5. Assembly / Connection
5.1 Assembly
The DryExx
®
metering stations are pre-assembled by the manufacturer and are ready for
connection and wall mounting on delivery. The metering stations are only to be used
with a DryExx
®
control unit, through which electrical power must also be supplied.
5.1.1 Wall Mounting: DryExx
®
30
25
360
Lubo DryExx®
410
550
Fig. 5.1
For wall mounting the following parts are supplied:
Piece Description Article no.
4 Wood screws, 8 x 60 mm 413110926
4 Wall fixing plugs 417200005
4 Spacer 38631302
4 Disc 413500313
Make sure there is adequate access for maintenance
to be carried out!
CAUTION
Install the metering station as close as possible to where the lubricant is stored
(canister, barrel, container, tank) to ensure that the suction tubing is as short as possible.
5.2 Connection
5.2.1 Connection Overview: DryExx
®
Fig. 5.2 Unit type 182830 Fig. 5.3 Unit type 182831
Pos Description
1
User connection, R ¾“
2
3/2-Way-Solenoid valve, pre-control valve
3 2/2-Way-Diaphragm valve, pneumatic controled
4
Return connection for hose 12/21
5
Lubricant connection, pressure side.
6 Lubricant connection via suction lance
7 Diaphragm compressed air pump
8
Compressed air connection, applicator pump
9
Compressed air filter regulator
10 Compressed air connection, 8/6