Ecolab ECOTRANS, Руководство по эксплуатации

Страница: 20 / 40

417101733_Ecotrans.doc - 20 - Rev. 2-03.10
5. Structure/mounting
5.1 Structure
Fig. 5.1
Pos. Description
1 Display
2 Calibration adjustment pH 4/9
3 Calibration adjustment pH 7
4 pH sensor connection
5 Standard signal output
6 Mains connection
5.2 Drilling plan
Fig. 5.2
The dimensions shown in this drilling plan enable the
Ecotrans to be mounted on a wall using four suitable
screws and rawlplugs.
5.3 Mounting

Select the installation site for the Ecotrans and drill four holes as per the drilling plan
shown under section 5.2 .

Insert suitable rawlplugs into the drilled holes

Unscrew the four cover screws on the Ecotrans

Remove the cover

Insert the appropriate fastening screws through the openings in the housing

Screw the screws into the rawlplugs and tighten them by hand