manualshive.com logo in svg

Ecolab EcoJet EcoStar 1500, Руководство по установке и эксплуатации

Поделиться
Скачать
Ecolab EcoJet EcoStar 1500 Скачать руководство пользователя страница 23

23

4.  AUTO FORMULA SELECT -

ENABLED: (microprocessor mode) Signal 1 is always the start signal in this dispenser. Click in box to
have washer microprocessor select formulas.
DISABLED: (chart mode) Formulas a manually selected at the User Interface.

5.  5-MINUTE LOCKOUT - Protects against noise on washer signals. ECOJET / ECOSTAR 1500 will not

respond to a washer signal 5 minutes 

after

 receiving a signal. Unless needed, do not use.

6.  QUALIFYING TIME - How long a signal must be on before ECOJET / ECOSTAR 1500 reacts to it. Default

is 5 seconds. Can be programmed from 0 to 120 seconds.

7.  OPERATING ZONE - This feature prevents EcoJet / EcoStar 1500 from dispensing during selected

hours. 

DISPENSER WILL NOT PUMP OUTSIDE OF THESE HOURS

. Do not use this feature unless

there is a problem in the account. Enter in military time. Maximum window is from 00:00 (Midnight) to
23:59. No entry will allow pumps to be activated 24 hours.

8.  AUTO FORMULA RESET – Used to enable the automatic formula termination feature. Resets formulas to

00 at the end of each load. Click in box to activate.

9.  UNIT OF MEASURE - Select either U.S., Metric of Imperial.

10. 

ACCESS CODES / ID NUMBER – ACCESS & I.D. numbers are entered at the USER INTERFACE. Do
not alter these values from the PC software.

5 REPORT SETUP

Use mouse or TAB key to navigate in screen. When all information is entered and verified, CLICK on the
DISK ICON to SAVE.

1.  WATER FLOW RATES – For future expansion, do not enter any numbers.

2.  SHIFT START TIMES - Enter up to three shifts in military time.

3.  WASH WHEEL - Enter wash wheel capacity. A NUMBER MUST BE ENTERED FOR THE COPY

WASHER FUNCTION TO WORK PROPERLY.

4.  INSTALLATION - Enter installation date, XX/XX/XX

5.  CYCLE TIME

TOLERANCE

 – Enter formula operating window. The tolerance number gives the formula a +/-

window of operation before logging on the exception report.

6.

  ACCOUNT NAME AND LOCATION - Enter account name and location. The name entered here

appears on the reports.

Содержание EcoJet EcoStar 1500

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды