8
Soft Keys #1 - #4 (at bottom of display):
These soft keys offer dynamic functions based on the sub-menus selected.
Idle screen:
- allow access to washer load counts
- allow access to washer info (status)
- allow access to user options for wash formulae
Programming Mode:
- various functions based on sub-menu selection
1.2
Customer
Screens
This section describes the screens available to the customer and/or operator (non-programming mode). The screens
depicted in the following sections are snap-shots of the optional Formula Select Module (FS) and Condor Controller.
It should be noted that each FS module is set at a unique communication address and displays information specific to
the washer assigned to it. In some cases it will also display total system information.
-
Normal Operation Idle Screens (non-MicroMode)
Formula Select module
F00 No Program is displayed:
- Use the Up/Down key on the FS module to scroll through the formulae.
- Use the center <Enter> key to select a formula.
- Use BOTH Up + Down keys to cancel a formula.
Condor Controller
Idle screen for a 3-washer account:
Time, account name, and date are displayed, as well as the status of each of the 3 washers. In this case, all
machines are idle (F00 no formula selected).
