38
Screen
Description
4.2
(CHART STOP)
Edit Formula
–
with Chart Stop Enabled
Chart Stop (or Machine Hold) extends chemical contact time in the wash cycles. Refer to
Chart
Stop Wiring
in the
installation manual
for wiring recommendations.
Chart Stop Delay
(Default = 0 minutes; Range = 0
–
60 minutes): Programming this type of delay
will insert a pause between when the validated chemical signal is received from the washer, and
when the product begins its dose. If Chart Stop Delay = 0 minutes, the product will be dosed
immediately after the washer signal is received and validated.
Chart Stop Timer
(Default = 0 minutes; Range = 0
–
60 minutes): This timer will put the washer
on hold between doses. The timer begins after a product has been dosed.
<ENTER>
Edit Chart Stop Delay or Chart Stop Timer
Proceed to edit/assign product and product amount to wash step
*Continue from Screen EF-5 in the previous section.
4.2.4.3
(CHART STOP)
Save Selection
4.2.4.4
(CHART STOP)
2.4.4
Submenu #4.0 Formula Menu --- Formula Summary
Formula>Select Washer>Washer 1> #4.2
Capacity=99 LB;
F1. W
HITE
T
OWELS
1. Copy Formula?
2. Edit Formula?
3. Formula Summary
4. Reset Formula?
3. F
ORMULA
S
UMMARY
Formula>Washer 1>
#4.2.3.3
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6
C2
C4
C13
C2
Formula>Washer 1>
#4.2.3.3
Capacity=99 LB;
F1. W
HITE
T
OWELS
Step Delay
1.WE I
NPUT
1 05
2.WE Input 2 05
3.WE Input 3 05
1.WE I
NPUT
1 05
P3
P2
P1
