65
The pump will dispense chemistry to 1 of the 3 washing machines. There is a 30 second pre- and post-flush after each product
is dispensed.
The Smart Queue Logic built into the controller allows for efficient and timely servicing of multiple machines. As chemical
request signals are received from the washers, the requests are logged into
the system’s dosing queue. The system identifies
the chemical request signals coming in and assigns them a priority. Chemical request signals with the highest priority will be
dosed first.
7.2 Selecting a Wash Formula
There are three ways a wash formula can be selected on the AQUANOMIC EU system.
1.
On the Formula Select module
2.
On the Condor Controller
3.
Automatic selection by washer (MicroMode)
Selecting a Wash Formula: Formula Select Module
The Formula Select is an optional module that is intended to be installed on the front of each machine. If no formula select
modules are present, refer to the following two sections: Condor, MicroMode.
A formula must be selected on the washing machine as well as on the Formula Select module. If the system is set up for
MicroMode, the formula will only need to be selected on the washing machine.
Use the Up/Down arrow keys to scroll through the formula list.
Press the Center <Enter> key to select a formula.
If the <Enter> key is not pressed and a formula is highlighted for 10 seconds, the formula will be auto-selected.
Press BOTH Up and Down arrow keys to cancel a formula.
