Ecolab Advanced Laundry, Руководство по установке и эксплуатации

Страница: 14 / 51

3.4 Controller Installation
3.4.1 Mounting on Vertical Surfaces (Preferred)
1. Find a suitable location for the Controller either on or close to the washer. The keypad should be
readily accessible and the display easily visible to the user.
2. Connect communication cables, Pump Module connector and Machine Signal Interface connector,
to Controller bottom. Secure cables at the Controller with tie wraps.
3. Clean the surface of the vertical mounting location with alcohol or similar to provide best adhesion
of the Dual Lock ™ strips.
4. Cut two 3” x 1” Dual Lock ™ strips. Remove the adhesive backing paper and affix both strips
vertically on the back of the controller enclosure.
5. Cut two additional 3” x 1” Dual Lock ™ strips and fasten to the strips located on the back of the
controller. Remove the adhesive backing paper and affix the Controller in the desired mounting
surface location.
6. Connect communication cables, Pump Module connector and Machine Signal Interface connector,
to Controller bottom. Secure cables at the Controller with tie wraps.
3.4.2 Mounting on Horizontal Surfaces
1. Find a suitable location for the Controller either on or close to the washer. The keypad should be
readily accessible and the display easily visible to the user.
2. Use the optional mounting bracket for installation on horizontal surfaces.
3. Attach the stainless steel mounting plate on the back of the controller with provided screws.
4. Line up the holes of stand with the holes on the side of the plate.
Advanced Laundry Control System Installation & Operation Manual 14