Ecolab Advanced Laundry, Руководство по установке и эксплуатации, Страница: 21 / 51

Advanced Laundry Control System Installation & Operation Manual 21
d Counter
rmu rs from a pump 3 request signal. Even if pump 3 product is
.2.1 Enter Program Mode
rrow key.
h r Setup, Formula
r
4.2.2
•
•
Program Mode menus are linked to display icons.
•
Program modes may be accessed incrementally, by pressing the NEXT key.
•
Press and hold keys to use the “auto key repeat” feature for faster scrolling.
4.1.5 Formula Loa
Fo la load count and formula reset occu
not required for the selected formula the signal must occur for the formula to reset and be counted. In
this case set the product 3 amount to 0.
4.2 Progr am Mode
4
To enter program mode, press the NEXT key once, and you will be prompted to enter the password.
Then press the UP arrow key, LEFT arrow key, RIGHT arrow key, and DOWN a
T e password sequence allows user to access Quickstart, Account Setup, Washe
P ogramming, Records, Prime Mode, Time Calibration, and Diagnostic menus.
Program Mode Navigation
Refer to Figure 4 –1 for overview of programming menus.