Ecolab Advanced Laundry, Руководство по установке и эксплуатации, Страница: 25 / 51

4.4 ACCT SETUP – See Figure 4 – 3
The LCD displays a wrench icon on all Account Setup screens.
Account Setup programming is
recommended. It is important for gathering account data, establishing date/time for time stamps of tube
changes, and enabling/disabling prime option. Once ACCT SETUP is displayed, you can press the RIGHT
arrow key to step through the available screens.
1.
ACCT – Use the LEFT/RIGHT arrow keys to select the digit to edit. Use the UP/DOWN arrow keys to
set the number (0 – 9 are available). Press the RIGHT arrow key after setting the last digit to save
displayed account number.
2.
YEAR – Use the UP/DOWN arrow keys to scroll through years (2005 – 2019 available). Press the
RIGHT arrow key to save displayed year.
3.
MONTH – Use the UP/DOWN arrow keys to scroll through months (January - December available).
Press the RIGHT arrow key to save displayed month.
4.
DAY – Use the UP/DOWN arrow keys to scroll through days (01 - 31 available). Press the RIGHT
arrow key to save displayed day.
5.
HOUR – Use the UP/DOWN arrow keys to scroll through hours in military time (00 – 23 available).
Press the RIGHT arrow key to save displayed hour.
6.
MIN – Use the UP/DOWN arrow keys to scroll through minutes (00 – 59 available). Press the RIGHT
arrow key to save displayed minute.
7.
UOM – Use the UP/DOWN arrow keys to toggle between OZ/LB and ML/KG. Press the RIGHT arrow
key to save displayed unit of measure (UOM).
8.
PRODUCTS – Use the UP/DOWN arrow keys to select the appropriate number of products (3 – 6
available). Press the RIGHT arrow key to save displayed product number.
9.
CALIB? – Use the UP/DOWN arrow keys to toggle between YES and NO. In the ACCT SETUP menu,
Calibration defaults to “No” because you may have already calibrated under QUICKSTART.
a.
If you select YES and press the RIGHT arrow key, you will automatically enter TIME CALIB
programming (see Section 4.9 for information on calibrating pumps).
b.
If you select NO and press the RIGHT arrow key, you will move to the DEFAULT screen.
CALIB? Y
TIME CALIB
DEFAULT? N
CALIB? N
>
>
10.
DEFAULT? – Use the UP/DOWN arrow keys to toggle between YES and NO.
a.
If you select YES and press the RIGHT arrow key, a new screen “R U SURE” is displayed. Use the
UP/DOWN arrow keys to toggle between YES and NO.
If you select YES and press the RIGHT
arrow key, all programming will revert to factory default and you will lose all programming.
The yellow LED will flash, indicating the change is occurring. The yellow LED will stop flashing
when the default settings are complete. This takes approximately 90 seconds.
b.
If you select NO and press the RIGHT arrow key, you will move to the ACCT NUMBER screen.
Advanced Laundry Control System Installation & Operation Manual 25