Ecolab 2.237.82, Руководство по эксплуатации

Страница: 27 / 37

417101373_Ecodos-PCB.docx - 27 - Rev. 10-03.12
4.3.4 Max. dosage time: (DIP switch “Delay | Mode |”)
Inductive Mode 2-wire Mode
(Mode setting) Obligatory (0=2-wire, 1=inductive)
(Mode setting) Obligatory
640 seconds
320 seconds
160 seconds
80 seconds
40 seconds
20 seconds
When all “ Delay ” DIP-switches are OFF, the dosage time is 10 seconds
4.3.5 Titration: (DIP switch “TIME/Titration”)
Factor 2
Not used
6.4 mS/cm
3.2 mS/cm
1.6 mS/cm
0.8 mS/cm
0.4 mS/cm
0.2 mS/cm
4.3.6 Enable signals
• Contact closed at input “ IN1 ” (Enable switch / pressure switch)
• Contact closed at input “ IN2 ” (Low level input / Capsule switch)
Further information see Chapter 4.6