Installation and User Manual. Version V03.B03_EN (23/09/2015)
ecoGEO
4
ECOFOREST Geotermia
1. GENERAL INFORMATION
Thank you for purchasing the ECOFOREST ecoGEO heat pump.
In this manual, you will find information about the installation, commissioning, maintenance and
troubleshooting of the equipment. It also includes useful information for the end user, such as navigating and
adjusting parameters using the front panel.
In order to get the most benefit from your ecoGEO heat pump, please read this manual carefully before
installing and commissioning the equipment. This manual should be kept for future reference.
In this manual you will find two different types of warning, as shown below; it is very important to pay special
attention.
The coGEO heat pumps are intended for serving heating-cooling systems and producing domestic hot water
(DHW). Any other application of the equipment could result in injuries and/or property damage or equipment
malfunction. The manufacturer will not be liable for any property damage and/or injuries resulting from the
inappropriate use of the equipment.
The heat pump should be installed by an authorized installer following the applicable local regulations and in
accordance with the installation instructions set outlined this manual.
NOTE
This manual applies to software version from V5.0 B79 onwards.
NOTE
Indicates a situation which could result in property damage or equipment malfunction. It may also
indicate whether the practice is the commendable for the equipment.
DANGER!
Indicates an imminent or potentially hazardous situation which, if not avoided, could result in death or
personal injury. It may also warn you about unsafe practices.
