User manual
31
EN
Inverter technology
The compressor and circulation pumps with modulating inverter technology can adapt the thermal power, flow and outlet
temperature to any given needs. On the other hand, the starting cycles are considerably reduced, prolonging equipment service life.
All this allows users to reduce installation electrical consumption and obtain optimum energy efficiency throughout the year.
HTR technology
High temperature recovery (HTR) system. This heat exchanger is used to raise the DHW storage tank temperature to 70ºC when the
heat pump is producing heat or cool air for the home. This technology increases the performance of the heat pump and its energy
efficiency, since it reduces the time dedicated to the production of DHW.
Auxiliary integrated hot water equipment
Electrical resistor in the production circuit. This resistor can be used at specific times to cover consumption peaks, achieve high DHW
temperatures or act as an emergency unit if the compressor cannot be started up.
Passive cooling technology
The installation can also include an additional exchanger for passive cooling. This exchanger transfers heat directly from the
production circuit to the brine circuit without having to use the compressor. The only electrical consumption is by the circulation
pumps, thereby obtaining high energy efficiency. This technology allows economic home cooling with moderate outdoor
temperatures.
Active cooling technology by cycle inversion
Reversible heat pumps can reverse the operation cycle in the summer to produce active cooling. Thus, the heat pump transports
energy from the home to the terrain by using the compressor. This technology can be used to cool the home even in the presence of
high outdoor temperatures.
Simultaneous production
The heat pump can produce heat and cold simultaneously, it controls the emission temperature for both services by managing the
heat pump and modulating derivation valves.
Comprehensive design
Ecoforest heat pumps include most of the components needed for the installation or heating / cooling and DHW. This simplifies
external installation, reducing costs and space.
Options
ecoAIR
ecoGEO
ecoGEO
Reversible
ecoGEO HP
ecoGEO HP
Reversible
Active cooling technology by cycle inversion
✓
✓
✓
Simultaneous production
✓
✓
Passive cooling technology (internal heating exchanger)
✓
✓
Passive cooling technology (external heating exchanger)
✓
✓
✓
✓
Auxiliary integrated hot water equipment
✓
✓
✓
HTR technology
✓
✓
Table 2.1.
Available options in Ecoforest product range.
