Ecoflam MULTIFAM 500.1 PRE, Руководство пользователя

Страница: 6 / 48

M
Ai r
Gas
313
160
170
144
142
141
120
150
314
34 9
151
155
100
143
To be supplied by the installe r
To be supplied by the installe r
107
143 Antivib r ation coupling
144 Gas gove r no r
150 Batte r fly valve
151 Gas t r ain S iemens VGD....
155 P ilot gas t r ain
160
Kit
tightness cont r ol (optional)
170
Kit
tightness cont r ol fo r pilot gas valve (optional)
313 Min.gas p r essu r e switch
314 Max.gas p r essu r e switch (optional)
34 9 Ai r /gas dampe r moto r
6 www.ecoflam­burners.com
EN
420010940500
BURNER DESCRIPTION
Gas train ­ Kit ­ Accessories: assembly to the burner
MATCHING GAS TRAIN WITH DIAGRAM OF PRESSURE DROPS
ARE IN THE DEDICATED SECTION OF THIS MANUAL
VGD 20.503 Rp 2” / VGD 40.065 ­ 40.080 ­ 40.100 ­ 40.125
1. Main gas pipe
2. Ball valve ACS
3. Antivibration coupling ACS
5. Min gas pressure switch
EXPOR
T
GAS TRAIN
EN676
6. Safety gas valve + 10. Actuator
7. Working gas valve + 11. Actuator
8. Gas leakage control KITTC *
9. Gas filter ACS
KIT - MAX Gas pressure switch KITPRES
ACS - Gas train connection pipe GTCP **
Ecoflam gas trains are delivered separately for all gas and dual fuel burners and are available in different configurations:
Double gas valves with actuators and regulator VGD Siemens and min pressure ACS gas filter
1 2 3 9 11 8 10 5
6 7
Gas governor / Filter
FGDR - FILTER
Compulsory EN676
Tightness control
KITTC- Model
Compulsory > 1200 kW
Max Pressure switch
KITPRES50
KITPRES150
Other accessories Modulation Kit
KITMD-RWF50
Probe-...
!
WARNING: EN676 compulsory kit and accessories in order to comply to the safety regulations. Additional accessories and kits
shall be installed by the installer in accordance to the local safety regulations and codes of practise.
HOW TO INSTALL THE GAS TRAIN INTO THE BURNER AND CALCULATE THE OVERALL DIMENSIONS :
refer to the dimension page and thE gas train manual for all detailed information
!
GTCP­...* WARNING: in order to fit the gas train, the corresponding connection pipe must be ordered (GTCP size and fitting depend on the
burner and the gas train selected). Upon the installer responsibility it is mandatory to install additional support(s) in order to not overload the
burner body with the dead load of full gas train, accessories, piping and so on.
The burner body can stand just the gas valve and the piping between the gas valve and the body.