13
OPTIONAL SETTINGS:
=
SALT EFFICIENCY
=
MAXIMUM DAYS BETWEEN REGEN-
ERATIONS
=
12 / 24 HOUR CLOCK
1.
To set any of these options, press and hold SELECT
for 3 seconds until “000 - -” shows in the display.
Then press (do not hold) SELECT again to display
one of the “Salt Efficiency” screens shown below.
12 OR 24 HOUR CLOCK:
All time displays are
shown in 12 hour (AM/PM) format at the default
setting. If 24 hour time format is de sired, set to “24
hr” by pressing the UP (
È
) button.
4.
Press SELECT to return to the normal run (time of
day) screen.
SALT EFFICIENCY:
When this feature is ON, the
water softener will operate at salt efficiencies of
4000 grains of hardness per pound of salt or high-
er. The softener may recharge more often using
smaller salt dosage and less water. This softener
is shipped with the efficiency feature set OFF. Use
the UP (
È
) or DOWN (
–
) buttons to change
between OFF and ON. An efficiency icon will be
displayed when this feature is ON.
Controller Features / Options
FIG. 24
FIG. 25
MAXIMUM DAYS BETWEEN REGENERATIONS:
The electronic controller automatically determines
regeneration frequency. This provides the greatest
operating efficiency and, under most conditions this
feature will be left in its default mode. However,
you can set this feature to force a regeneration
every set number of days. You may want to do this
if, for exam ple, your water supply contains iron and
you want the softener to regenerate at least once
every few days to keep the resin bed clean. Use
the UP (
È
) or DOWN (
–
) to change the number of
days (up to 15). If no change is desired, continue
to next step.
3.
Press SELECT again to display the “12 or 24 hr”
screen.
2.
Press SELECT again to display the “Recharge
Days” screen.
FIG. 26
Efficiency
Icon
FIG. 27
FIG. 28
CALIFORNIA EFFICIENCY REQUIREMENT
Your water softener has a “High Efficiency” fea-
ture with an ON or OFF setting. This softener
setting is shipped in the OFF position, which uti-
lizes the maximum rated capacity while most
often achieving maximum salt efficiencies.
When installing this unit in the State of
California, you MUST turn this setting to the ON
position, which may initiate more frequent
recharges. However it will operate at 4000
grains per pound of salt or higher.
If you wish to turn the Salt Efficiency feature ON
( icon will show in the display), follow the
instructions on this page.
