Ecobike S3, Инструкция по эксплуатации

Страница: 11 / 21

• Wheel adjustment.
• Appropriate tire pressure.
• Pedal adjustment.
• Derailleurs are adjusted appropriately.
• The lighting is properly set.
After checking all the above items, make sure that the cables in the bike are not
damaged and are in the correct position. Every 6 months, the bike should be
provided with a comprehensive service at any service point to ensure that the
user is completely safe while using.
3.2. Self-assembly
Below you will find useful information about the installation of our bicycles,
especially those that require self-assembly:
Step 1: Preparation:
Pull the bike out of the carton with all the components in it. Be careful not to
scratch your bike and be careful not to damage any cables or other
components. Make sure your bike does not miss any items.
Step 2: Assemble the seat
1) Unscrew the clamping nuts (on both sides).
2) Insert the seat into the frame.
3) Tighten the seat bolts on both sides.
4) Unscrew the saddle on the saddle yoke and then slide the seat end up or
down so that it is parallel to the ground.