Ecobike S3, Инструкция по эксплуатации

Страница: 15 / 21

4.2. Installing and removing the
battery
To remove the battery, unfasten
the lock which is located along the
battery’s box. Remove the battery
by pulling it out.
To put the battery back into place,
insert the battery along to the
guide rail. Push it closely against
the controller box. Fasten the lock.
4.3. Charging the battery
WARNING: Do not charge a battery
in a frame. Remove your battery
before charging.
Never leave the battery charging unattended.
Battery level is indicated by four LEDs on the side of the battery and on the LCD
display. Charge the battery at ambient temperature, on a non-flammable and
dry surface, away from heat, moisture or flammable materials. Observe the
following steps when charging the battery:

Insert the charger plug into the battery charging socket, and then
connect the charger cable to the power point.

When the charger light is red, the battery is charging. When the red light
turns green, the battery is fully charged.

When charging is completed, at first unplug the power cord from the
power point and then from the battery.
WARNING:

Only use the original charger to charge the battery, otherwise the
battery may be damaged and the warranty will be lost.