Setting up Reminders
Your Smart Thermostat can be programmed to remind
you of required filter changes and regular maintenance.
These reminders were configured by the contractor
during installation. Changing them may effect the
operation of your heating and cooling system.
If you are not sure about what equipment you have
installed or whether you need to replace rather than
clean your filters, please contact your heating and
cooling contractor, or consult your original heating
and cooling equipment manuals for the recommended
maintenance procedures.
Maintenance
The Maintenance alert is generated when regularly
scheduled maintenance is required. This alert, along with
your contractor’s contact information (if programmed by
the contractor), will be displayed on the touch screen.
Select this item to turn the reminder on or off, show the
date of the last service, and select a reminder interval
between one and 12 months.
Furnace Air filter
Sets the reminder period for cleaning or replacing the
furnace air filter.
Select this item to turn the reminder on or off, and
to set the reminder interval in run-time hours or
calendar months. You can also check the date of the
last filter change.
Humidity Filter (Optional)
Sets the reminder period for cleaning or changing the
humidifier filter.
Note:
If your Smart Thermostat is not connected to
a humidifier or dehumidifier this option will not be
displayed.
Select this item to turn the reminder on or off, and
to select the reminder interval in run-time hours or
calendar months. You can also check the date of the
last filter change.
13
Ventilator Filter (Optional)
Sets the reminder period for cleaning or changing the ventilator filter.
Note:
If your Smart Thermostat is not connected to a ventilator, this
option will not be displayed.
Select this item to turn the reminder on or off, and to set the
reminder interval in run-time hours or calendar months. You
can also check the date of the last filter change.
Temperature Alerts
The Smart Thermostat can generate alerts when the temperature
in the home reaches a pre-programmed temperature. This protects
your home from damage due to freezing or excessive heat.
If this alert has been set up, you will see the alert on the Smart
Thermostat. If you’ve configured your personal web portal, you
will also get an e-mail alert.
Low Temperature Alert
Select this item to set the temperature at which the Smart Thermostat
will generate a Low Temperature alert. The range can be adjusted to:
Off – no alert will be generated
Set temperature range of 35 – 68°F (1.5 – 20°C)
High Temperature Alert
Select this item to set the temperature at which the Smart Thermostat
will generate a High Temperature alert. The range can be adjusted to:
Off – no alert will be generated
Set temperature range of 76 – 104°F (24.5 – 40°C).
Auxiliary Heat Run time Alert
(optional)
In a heat pump, with auxiliary heat configuration, you can
program the Smart Thermostat to generate an alert if the auxiliary
heat runs for more than this programmed amount of time during a
24 hour period.
Auxiliary Outdoor Temperature Alert
(optional)
In a heat pump, with auxiliary heat configuration, you can
program the Smart Thermostat to generate an alert if the auxiliary
heat is called for when the outdoor temperature exceeds this
programmed set point (this feature requires an internet connection
to function properly)
14
To set up Reminders:
From the Home
screen, press
More.
Press
Settings
and
select
Reminders
from
the list.
Scroll through options
to set and adjust to
your needs.
