Using the Editor
The second way to edit your Smart Thermostat program
is to use the
Editor
. This method is more advanced than
the Wizard. You can edit specific times, temperatures and
furnace fan settings for each day of the week.
Select the desired program period to adjust start times
or disable the period entirely.
Select a current Heat or Cool set temperature to
adjust the temperature or fan settings for that period.
Any program period changes will automatically apply
to all the days that period runs and are shown at the
top of the screen.
If your system is enabled for auto-changeover mode,
the heat and cool set temperature will automatically
be adjusted to ensure a minimum difference between
the heat and cool set temperatures.
In auto system mode the fan setting will revert to
whatever is configured in the
Details
- fan setting.
Auto-change over mode and the minimum temperature
difference is configurable in the installer setting.
Note:
Humidity levels are not included as a programmable
option, even if a humidifier or dehumidifier is installed and
controlled by the Smart Thermostat.
17
To schedule a vacation:
From the Home
screen, press
More.
Press
Vacation
. Press
New and enter a
name and the dura-
tion of your vacation.
18
Scheduling a vacation
The Smart Thermostat’s
Vacation
feature helps you
conserve energy while you are away from your home
for extended periods of time and also ensures that your
home is comfortable when you return.
To program a new
vacation
select the New button. Here
you can program a name for the event, the start date and
time, as well as the end date and time.
You can enter any number of uniquely named
vacations.
Other features to choose from include:
ecobee optimize
Turn this option
ON
to tell the thermostat to automatically
set your heat temperature, cool temperature, system mode
and furnace fan settings to maximize energy conservation
while you are away.
Turn this option
OFF
to manually configure Heat
Temperature, Cool Temperature and Fan settings.
Heat Temperature
Programs the set temperature when the system is in Heat
mode, i.e., when the furnace is on. Set a lower temperature
to save energy.
Cool Temperature
Programs the set temperature when the system is in Cool
mode, i.e., when the air conditioner is on. Set a higher
temperature to save energy. You can also choose to turn
off your cooling system while you are away to ensure it
does not go on at all.
Fan
Toggles the fan setting between ON and Auto.
ON
The fan runs all the time regardless of programming or
if there is a call for heat or cool. The fan will also run if the
System Mode is OFF.
Auto
This option turns the furnace fan on but only when the
system is heating, cooling or ventilating your home or to
satisfy the minimum fan run time as programmed.
To use the Editor:
From the Home
screen, press
Program
then
press
Editor
in
the upper left corner
of the screen.
Select the days you
wish to adjust
(choosing more than
one day will change
settings for all the days
selected) and press
Next
.
Adjust temperature
by pressing the heat
or cool buttons on the
right hand side.
Editor summary screen
