Page 11
Please wait 2-3 minutes after
starting the pump to achieve the
desired efficiency.
Please read the pump’s user
guide for water connection.
When using a carboy, a water
filter is not required.
4. Attach the connector into the faucet
adaptor and tighten by hand / tool.
WARNING:
After turning the tap
on, ensure there is no water leak
on either end of the water hose.
In case of leakage, turn the valve
off and tighten all connections
using a pipe wrench or pliers.
Installation
5. To avoid damaging, shifting or
accidentally disconnecting the hose, use the
clips provided to fix the water hose
appropriately.
For products using water carboy
(Optional)
To use a carboy for the product’s water
connection, the water pump recommended
by the authorized service must be used.
1. Connect one end of the water hose
provided with the pump to the product and
follow the instructions.
2. Connect the other end of the water hose
to the water pump by pushing the hose into
the pump’s hose inlet.
3. Place and fasten the pump hose inside
the carboy.
4. Once the connection is established, plug
in and start the water pump.
