Page 10
Connecting water hose to the product
To connect the water hose to the product,
follow the instructions below.
1.Remove the connector on the hose nozzle
adaptor at the back of the product and run
the hose through the connector.
Installation
2.Push the water hose down tightly and
connect to the hose nozzle adaptor.
3.Tighten the connector manually to fix on
the hose nozzle adaptor. You may also
tighten the connector using a pipe wrench
or pliers.
4.Connect the other end of the hose to the
water mains or to the water pump. See
page 11 to use a carboy.
Connecting to water mains (Optional)
To use the product by connecting to the cold
water mains, a standard 1/2” valve connector
must be installed to the cold water mains in
your home. If the connector is not available
or if you are unsure, consult a qualified
plumber.
1. Detach the connector (1) from the faucet
adaptor (2).
2. Connect the faucet adaptor to the water
mains valve.
3. Attach the connector around the water
hose.
