Eco EASYPELL EPA 09, Руководство по установке, Страница: 53 / 64

8.14 Smart-PV/Grid
You activate the smart grid function under parameter S01 (=1).
Smart-Grid
Operating status Smart-Grid EVU
Increased operation ON ON
OFF ON
Normal operation ON OFF
Reduced operation OFF OFF
1 . Smart grid and hot water mode are activated: The heat pump is primarily oper-
ated in hot water mode. The hot water temperature is changed to 70° C (hot
water tank temp.) < 69° C. The hot water tank heating is switched on (hot water
tank temp.)
≥
70 and the hot water tank heating is switched off.
2 . Smart grid is deactivated and the EVU signal is activated: If the hot water mode is
set as valid and the mode is switched on, the heat pump is primarily operated in
hot water mode (hot water tank temp.) < P03-P02, the hot water tank heating is
switched on, (hot water tank temp.)
≥
P03+2, the hot water tank heating is
switched off.
3 . Smart grid is activated and the utility signal is deactivated: The heat pump is
operated normally.
4 . Smart Grid and hot water mode are deactivated: The appliance is not operated in
hot water mode and the hot water tank heating and the disinfection function are
inactive. The appliance switches off after the set switch-off time S02.
8.15 Pump function when temperature is reached
Once the switch-off temperature has been reached, the mode of operation can be
defined under the set value F02.
At 0, the pump stands for time-out F03 and switches on for 3 minutes. At 1, the pump
continues to run normally, at 2 it switches off until restart after the return temperature
falls below the set temperature.
8 Operating the heat pump 53
Installation Manual